A Quick Guide to Swapping TPMS Sensors During Tyre Rotation
Tyre rotation is an essential part of vehicle maintenance, helping to ensure even tyre wear and prolonging the life of your tyres. However, if your vehicle is equipped with a Tyre Pressure Monitoring System (TPMS), you’ll need to make sure the sensors are correctly mapped to their new positions after rotation. Here’s a quick guide on how to swap your TPMS sensors effortlessly.
Why Swap TPMS Sensors?
When you rotate your tyres, the sensors move to new positions on your vehicle. If you don’t update the TPMS display, it will show incorrect pressure readings for each tyre. Swapping the sensors ensures the display accurately reflects the pressure in each tyre’s new location.
How to Swap TPMS Sensors
Most TPMS systems, like the Promata Mata 1 and Mata 2 series, come with a handy Tyre Swap Function that makes this process simple. Here’s how to do it:
-
Enter Settings Mode:
-
Hold the Settings button for 3 seconds until you hear a beep.
-
Use the buttons to navigate to the Tyre Swap Function.
-
-
Select the First Tyre:
-
Press the settings button to select the first tyre (e.g., front right).
-
The display will flash the selected tyre position.
-
-
Select the Second Tyre:
-
Press the button again to select the second tyre (e.g., rear right).
-
The display will flash the second tyre position.
-
-
Confirm the Swap:
-
Once both tyres are selected, press the button to confirm the swap.
-
The display will update the tyre positions automatically.
-
-
Exit Settings Mode:
-
Hold the Settings button until you hear two beeps to exit the mode.
-
Tips for a Smooth Swap
-
External Sensors: If you’re using external sensors, you can physically remove them and reattach them to the correct valve stems after rotation.
-
Internal Sensors: For internal sensors, use the Tyre Swap Function on the display to update their positions.
-
Double-Check: After swapping, drive for a few minutes to ensure the display updates and shows accurate readings.
Why It Matters
Swapping your TPMS sensors during tyre rotation ensures your system continues to provide accurate, real-time pressure data. This not only keeps you safe on the road but also helps maintain optimal tyre performance and fuel efficiency.
By following these simple steps, you can easily swap your TPMS sensors and keep your system running smoothly. Happy driving! 🚗
